Product introduction

Detailed explanation of the application

2018-03-10

Water treatment: reverse osmosis transportation

Jet pump as seawater desalination, brackish water, chemical plant wastewater RO reverse osmosis high-pressure water delivery system in foreign countries has become the standard configuration, the reverse osmosis technology in China is growing, more and more are currently using low pressure reverse osmosis, this is because the low pressure pump is good, not easy to find in the domestic high pressure pump. But the low pressure film is expensive, and it is a consumable. It is not economical to use. As the pressure of the reverse osmosis pump is unstable, the conventional pump affects the penetration effect. The jet pump can greatly broaden the selection surface, and it is also the future development direction.

High pressure cleaning

As a high pressure cleaning pump, the rotary jet pump has been the marking equipment in foreign countries. The rotary jet pump can guarantee the constant pressure and the small flow, the matching power is relatively low, and the service life is longer.

Paper mills wash the paper pulp and impurities on the surface of the paper machine. The effect is very obvious: it can maintain high pressure and long-term continuous use, and ensure the surface quality of paper strictly.

The high pressure cleaning and conveying pump for PCB of PCB, the high pressure cleaning system for copper pipe and steel pipe manufacturing, the CIP high-pressure cleaning system for food and beverage industry, and the rotary pump are all a good choice.

Petroleum and petrochemical: oil field washing well, aging oil recovery pump

At present, with the increase of the depth of oil mining in China, the mining technology has changed gradually. In order to ensure the increase of oil production, the polymer is added slowly.

The above situation in the oil production and oil recovery of aging oil well washing problems emerged based on the original aging oil recovery pump in poly district is not good, the well depth increase after washing can not be the original super heat conducting, fracturing truck and the cost is too high, and as well as encryption, fracturing car washing will come.

We recommend the use of jet pump to solve the problems in the production of oil field, combined with the characteristics of the rotary jet pump.
First, the rotary jet pump is the advantage and characteristic of the oil recovery pump of the oil field.
1, the structure is simple, easy to maintain, not easy to leak.
2, the auxiliary power is lower, the power consumption is small, and the energy saving is less.
3, not easy to damage, less vulnerable parts, long running time, more durable.
4, the oil recovery effect is better, the thickness of the oil layer can be reduced from the original minimum 50cm to 20cm.

Two. The main reasons for replacing the fractured vehicle and the superconducting hot washing car by the jet pump are as follows:

1. For the superconducting hot washing car, in the late period of production of oil production is still very sufficient oil fields, in the short term can basically meet the requirements of the main well washing. But the well washing time is too long (at least 4-5 hours), and if the number of wells is increased too much, it can't be washed out. For most oil wells with deep oil depth, superconducting car washing can not be used, so superconducting car washing is too limited.

2. for fracturing trucks, it can meet all the requirements of well washing, but after all, the cost of fracturing truck is too high, and its oil field capacity is limited, and its fuel consumption is also large. It is the best choice for an accident well, and it is a little wasteful for the well produced well.

3. rotary jet pump as well washing equipment is the most economical and most effective choice. The rotary jet pump can use the power of the oil well site directly, and the matching power is only 30kW. For the normal well, 100% is effective, the matching hot water truck (or the heating car) can easily wash a well in 2 hours, and no other energy consumption is needed.

Industry: easy to solve cavitation, variable operation problems

In the process of chemical engineering, it is a necessary means to pump high temperature and high pressure liquid by pump. It is a very headache problem to run the cavitation and variable working conditions.

Because of its unique working principle and structural characteristics, rotary jet pump has the characteristics of small flow rate, high lift, no leakage, cavitation resistance and stable operation under variable conditions, making it the first choice for chemical process pump.
Some typical applications are as follows:
1. desalting water pressurized pump, high pressure seal water pump;
2. benzene hydrogenation, methanol, acetic acid, synthetic ammonia, and other process wastewater delivery pumps;
3. The water supply pump of the process boiler and the condensate recovery pump;
4. urea hydrolysis system feed pump, ammonia transport pump.

Paper industry: washing net, wash cloth, water, boiler condensate recovery

The application of jet pump in papermaking factory of high pressure water conveying, surface covering, paper machine net washing cloth has a good cleaning effect, completely solve the problem of the existence of pressure drop and other washing paper. At present, it has become a marking equipment for high pressure cleaning equipment in the paper industry, and it is becoming more and more popular in the domestic paper mills.
Main features:
1. power saving: lower supporting power, less power consumption, saving operation cost;
2. provincial maintenance: the structure is unique, almost maintenance free, long service life;
3. water saving: the pressure is stable, the pressure is not dropped, and the water is saved.

Carbon black industry: delivery of raw oil, fuel oil and bonding agent

In 1980s, China imported 2 sets of jet pump from the United States, for the delivery of raw oil carbon black production line, in terms of stable operation and long service life is obviously better than the original with the centrifugal pump, gear pump, screw pump and multistage centrifugal pump, has now become the carbon black industry raw oil, fuel oil and adhesive transportation the standard equipment.
The rotary jet pump should be used in the carbon black industry.
1. bonding agent delivery: transporting honey sugar water, lignin and other additives adding system;
2. all kinds of hot water transportation, such as boiler water replenishment, condensate recovery, waste water transportation and so on.
3. raw oil transportation: coal tar, ethylene tar, anthracene oil and mixed carbon black oil;
4. Fuel oil delivery: all kinds of fuel oil used as carbon black fuel.